VNP7N04

Hey there! If you're on the hunt for some STMicroelectronics parts like the VNP7N04, you’ve come to the right place at szcomponents Electronics. We stock a wide range of electronics from the world’s top brands. Each piece we carry, especially the VNP7N04, is not only top-notch but also passes through rigorous checks by our own testing team to ensure it meets all the standards you need.

Just so you know, we diligently maintain the production status and pricing on SZC, updating them daily to keep you informed. However, please understand that sometimes these might not be bang up to date due to rapid changes. If you haven't found what you're seeking, you can acquire valuable information via email. This includes details on the VNP7N04 inventory quantity, preferential pricing, lead time, MOQ, datasheets and the manufacturer. We're always eager to assist you, so don't hesitate to reach out. Feel free to contact us anytime at www.szcomponents.com.

The VNP5N07-E is MOSFET PWR 70V 5A TO-220, that includes OMNIFET II?, VIPower? Series, they are designed to operate with a Tube Packaging, Unit Weight is shown on datasheet note for use in a 0.011640 oz, that offers Mounting Style features such as Through Hole, Package Case is designed to work in TO-220-3, as well as the Si Technology, the device can also be used as Non-Inverting Input Type. In addition, the Output Type is N-Channel, the device is offered in Status Flag Features, the device has a 1 Channel of Number of Channels, and Interface is On/Off, and the Supplier Device Package is TO-220AB, and Ratio Input:Output is 1899/12/30 1:01:00, and the Configuration is Single, and Number of Outputs is 1, and the Voltage Supply Vcc Vdd is Not Required, and Fault Protection is Current Limiting (Fixed), Over Temperature, Over Voltage, and the Output Configuration is Low Side, and Rds On Typ is 200 mOhm (Max), and the Voltage Load is 55V (Max), and Current Output Max is 3.5A, and the Switch Type is General Purpose, and Transistor Type is 1 N-Channel, and the Pd Power Dissipation is 31 W, and Fall Time is 40 ns, and the Rise Time is 60 ns, and Id Continuous Drain Current is 5 A, and the Vds Drain Source Breakdown Voltage is 70 V, and Rds On Drain Source Resistance is 200 mOhms, and the Transistor Polarity is N-Channel, and Typical Turn Off Delay Time is 150 ns, and the Typical Turn On Delay Time is 50 ns, and Forward Transconductance Min is 4 S.

The VNP5N07FI is MOSFET N-CH 70V 5A ISOWATT-220, that includes Not Required Voltage Supply Vcc Vdd, they are designed to operate with a 55V (Max) Voltage Load, Switch Type is shown on datasheet note for use in a General Purpose, that offers Supplier Device Package features such as ISOWATT-220, Series is designed to work in OMNIFET II?, VIPower?, as well as the 200 mOhm (Max) Rds On Typ, the device can also be used as 1899/12/30 1:01:00 Ratio Input:Output. In addition, the Packaging is Tube, the device is offered in ISOWATT-220-3 Package Case, the device has a N-Channel of Output Type, and Output Configuration is Low Side, and the Number of Outputs is 1, and Interface is On/Off, and the Input Type is Non-Inverting, and Features is Status Flag, and the Fault Protection is Current Limiting (Fixed), Over Temperature, Over Voltage, and Current Output Max is 3.5A.

The VNP5N07 is MOSFET N-CH 70V 5A TO-220, that includes 3.5A Current Output Max, they are designed to operate with a Current Limiting (Fixed), Over Temperature, Over Voltage Fault Protection, Features is shown on datasheet note for use in a Status Flag, that offers Input Type features such as Non-Inverting, Interface is designed to work in On/Off, as well as the 1 Number of Outputs, the device can also be used as Low Side Output Configuration. In addition, the Output Type is N-Channel, the device is offered in TO-220-3 Package Case, the device has a Tube of Packaging, and Ratio Input:Output is 1899/12/30 1:01:00, and the Rds On Typ is 200 mOhm (Max), and Series is OMNIFET II?, VIPower?, and the Supplier Device Package is TO-220AB, and Switch Type is General Purpose, and the Voltage Load is 55V (Max), and Voltage Supply Vcc Vdd is Not Required.