CY7C68013A-56PVXCT

EZ-USB FX2™ • Single-chip integrated USB 2.0 Transceiver, SIE, and Enhanced 8051 Microprocessor • Software: 8051 code runs from:    — Internal RAM, which is downloaded via USB    — Internal RAM, which is loaded from EEPROM    — External memory device (128 pin package • Four programmable BULK/INTERRUPT/ISOCHRONOUS endpoints    — Buffering options: double, triple and quad • 8- or 16-bit external data interface • GPIF    — Allows direct connection to most parallel interface    — Programmable waveform descriptors and configuration registers to define waveforms    — Supports multiple Ready (RDY) inputs and Control (CTL) outputs • Integrated, industry standard enhanced 8051:    — Up to 48-MHz clock rate    — Four clocks per instruction cycle    — Two USARTS    — Three counter/timers    — Expanded interrupt system    — Two data pointers • Supports bus-powered applications by using renumeration • 3.3V operation • Smart Serial Interface Engine • Vectored USB interrupts • Separate data buffers for the SETUP and DATA portions of a CONTROL transfer • Integrated I2C-compatible controller, runs at 100 or 400 kHz • 48-MHz, 24-MHz, or 12-MHz 8051 operation • Four integrated FIFOs    — Brings glue and FIFOs inside for lower system cost    — Automatic conversion to and from 16-bit buses    — Master or slave operation    — FIFOs can use externally supplied clock or asyn chronous strobes    — Easy interface to ASIC and DSP ICs • Special autovectors for FIFO and GPIF interrupts • Up to 40 general-purpose I/Os • Four package options—128-pin TQFP, 100-pin TQFP, 56-pin QFN and 56-pin SSOP • Four packages are defined for the family: 56 SSOP, 56 QFN, 100 TQFP, and 128 TQFP