FUSB302BVMPX

FUSB302BVMPX

对比
onsemi
FUSB302BVMPX
IC USB CONTROLLER I2C 14WQFN
对比

¥19.28

价格更新:一个月前
现货供应: 2192
45
为45个国家的客户提供服务
1000+
全球制造商
$140M
5年增长1.4亿美元
50.0M+
5年内配送了5000万个元件
onsemi

onsemi

onsemi 正在推动节能创新,帮助客户减少全球能源使用。 该公司提供全面的节能电源和信号管理、逻辑、分立和定制解决方案组合,帮助设计工程师解决他们在汽车、通信、计算、消费、工业、LED 照明、医疗、军事/航空航天和电源领域的独特设计挑战 供应应用。 onsemi 在北美、欧洲和亚太地区的主要市场运营响应迅速、可靠、世界一流的供应链和质量计划,以及制造设施、销售办事处和设计中心网络。

查看所有产品从 onsemi
FUSB302BVMPX Products

The FUSB302BVMPX targets system designers looking to implement a DRP/SRC/SNK USB Type-C connector with low amount of programmability. The FUSB302BVMPX enables the USB Type-C detection including attach, and orientation. The FUSB302BVMPX integrates the physical layer of the USB BMC Power Delivery protocol to allow up to 100 W of power and role swap. The BMC PD block enables full support for alternative interfaces of the Type-C specification. Reference code is available for the FUSB302BVMPX for easy implementation of Type-C and USB BMC Power Delivery protocol across several embedded controller platforms. Click on the Software link below.

Feature

  • Dual-Role Functionality with Autonomous DRP Toggle
  • Ability to connect as either a host or a device based on what has been attached.
  • Software configurable either as a dedicated host, dedicated device, or dual role.
  • Dedicated devices can operate both on a Type-C receptacle or a Type-C plug with a fixed CC and VCONN channel.
  • Full Type-C 1.2 Support. Integrates the following functionality of the CC pin
  • Attach/Detach Detection as Host
  • Current Capability Indication as Host
  • Current Capability Detection as Device
  • Audio Adapter Accessory Mode
  • Debug Accessory Mode
  • Active Cable Detection
  • Integrates CCx to VCONN switch with over-current limiting for powering USB3.1 Full Featured cables.
  • USB Power Delivery (PD) 2.0, Version 1.1 Support
  • Automatic GoodCRC Packet Response
  • Automatic soft reset packet sent with retries if needed
  • Automatic retries of sending a packet if a GoodCRC is not received
  • Dead Battery Support (SNK Mode Support when No Power Applied)
  • Automatic Hard Reset Ordered Set Sent
  • Low Power Operation: ICC = 25 µA (Typical)

Applications

  • This product is general usage and suitable for many different applications.

产品属性

类型 描述 全选
系列 Automotive, AEC-Q100
包装 卷带(TR)
产品状态 在售
可编程 未验证
协议 USB
功能 控制器
接口 I²C
标准 USB 3.1
电压 - 供电 4V ~ 21V
电流 - 供电 560mA
工作温度 -40°C ~ 105°C(TA)
封装/外壳 14-WFQFN 裸露焊盘
供应商器件封装 14-WQFN(2.5x2.5)

博客

¥19.28

价格更新:一个月前
现货供应: 2192
onsemi

onsemi

onsemi 正在推动节能创新,帮助客户减少全球能源使用。 该公司提供全面的节能电源和信号管理、逻辑、分立和定制解决方案组合,帮助设计工程师解决他们在汽车、通信、计算、消费、工业、LED 照明、医疗、军事/航空航天和电源领域的独特设计挑战 供应应用。 onsemi 在北美、欧洲和亚太地区的主要市场运营响应迅速、可靠、世界一流的供应链和质量计划,以及制造设施、销售办事处和设计中心网络。

查看所有产品从 onsemi

博客