MIC59P60BWM

MIC59P60BWM

Compare
Micrel Inc.
MIC59P60BWM
8 BIT SEIAL INPUT LATCHED DRIVER
Compare

$1.11

Quantity Available: 3462
SZC Quality Assurance
Micrel Inc.

Micrel Inc.

Microchip Technology Inc. stands as a preeminent purveyor of microcontroller and analog semiconductors, proffering a realm of diminished venture in product evolution, abridged aggregate system expenditure, and expedited market entry, spanning a myriad of heterogeneous patron implementations globally. With its central command stationed in Chandler, Arizona, Microchip avails itself of superlative technical assistance, concomitant with unwavering consignment and excellence.

View All Product from Micrel Inc.

MIC59P60BWM Features

The MIC59P60 serial-input latched driver is a high-voltage(80V), high-current (500mA) integrated circuit comprised ofeight CMOS data latches, a bipolar Darlington transistordriver for each latch, and CMOS control circuitry for thecommon CLEAR, STROBE, CLOCK, SERIAL DATA INPUT,and OUTPUT ENABLE functions. Similar to the MIC5842,additional protection circuitry supplied on this device includesthermal shutdown, under voltage lockout (UVLO), and over-current shutdown.The bipolar/CMOS combination provides an extremely low-power latch with maximum interface flexibility. The MIC59P60has open-collector outputs capable of sinking 500mA andintegral diodes for inductive load transient suppression witha minimum output breakdown voltage rating of 80V (50Vsustaining). The drivers can be operated with a split supply,where the negative supply is down to –20V and may beparalleled for higher load current capability.Using a 5V logic supply, the MIC59P60 will typically operateat better than 5MHz. With a 12V logic supply, significantlyhigher speeds are obtained. The CMOS inputs are compat-ible with standard CMOS, PMOS, and NMOS circuits. TTLcircuits may require pull-up resistors. By using the serial dataoutput, drivers may be cascaded for interface applicationsrequiring additional drive lines.Each of these eight outputs has an independent over currentshutdown of 500 mA. Upon over-current shutdown, theaffected channel will turn OFF and the flag will go low until VDDis cycled or the ENABLE/RESET pin is pulsed high. Currentpulses less than 2µs will not activate current shutdown.Temperatures above 165°C will shut down the device andactivate the error flag. The UVLO circuit prevents operationat low VDD; hysteresis of 0.5V is provided.

MIC59P60BWM General Description

Product Attributes

TYPE DESCRIPTION Select all
Features Status Flag
Number of Outputs 8
Fault Protection Over Temperature, UVLO
Ratio - Input:Output 1:8
Operating Temperature -40°C ~ 85°C (TA)
Output Configuration Low Side
Mounting Type Surface Mount
Output Type Bipolar
Supplier Device Package 20-SOIC
Interface Strobe, Serial
Package / Case 20-SOIC (0.295", 7.50mm Width)
Voltage - Load 15V (Max)
Voltage - Supply (Vcc/Vdd) -
Series -
Current - Output (Max) 500mA
Package Bulk
Rds On (Typ) -
Product Status Obsolete
Input Type -
Switch Type Latched Driver

$1.11

Quantity Available: 3462
SZC Quality Assurance
Micrel Inc.

Micrel Inc.

Microchip Technology Inc. stands as a preeminent purveyor of microcontroller and analog semiconductors, proffering a realm of diminished venture in product evolution, abridged aggregate system expenditure, and expedited market entry, spanning a myriad of heterogeneous patron implementations globally. With its central command stationed in Chandler, Arizona, Microchip avails itself of superlative technical assistance, concomitant with unwavering consignment and excellence.

View All Product from Micrel Inc.
45
Serves customers in 45 countries
1000+
Worldwide Manufacturers
$140M
$140M Growth in 5 Years
50.0M+
50M Parts Shipped in 5 Years