NXP USA Inc.
NXP Semiconductors, a frontrunner in embedded controllers, offers a wide array of MCUs with Arm-based processors. Their innovation extends to robust Power Management for industry and automotive use. NXP's products globally empower and interconnect, fostering proficiency for individuals, organizations, and the world. Noteworthy is the integration of Freescale Semiconductor into NXP (December 2015).
View All Product from NXP USA Inc.
•Wide supply voltage range from 2.0 to 6.0 V
•CMOS low power dissipation
•CMOS input levels
•High noise immunity
•Tolerant of slow trigger rise and fall times
•Separate reset inputs
•Triggering from falling or rising edge
•Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
•Complies with JEDEC standards
•JESD8C (2.7 V to 3.6 V)
•JESD7A (2.0 V to 6.0 V)
•ESD protection:
•HBM JESD22-A114F exceeds 2000 V
•MM JESD22-A115-A exceeds 200 V
•Specified from -40 °C to +85 °C and from -40 °C to +125 °C
The 74HC4538 is a dual retriggerable-resettable monostable multivibrator. Each multivibrator hastwo trigger/retrigger inputs (nA and nB), a direct reset input (nCD), two complementary outputs (nQand nQ), and two pins (nREXT/CEXT and nCEXT) for connecting the external timing componentsCEXT and REXT. Typical pulse width variation over temperature range is ± 0.2 %. The devicemay be triggered by either the positive or the negative edges of the input pulse. The durationand accuracy of the output pulse are determined by the external timing components CEXT andREXT. The output pulse width (TW) is equal to 0.7 × REXT × CEXT. The linear design techniquesguarantee precise control of the output pulse width. A LOW level at nCD terminates the outputpulse immediately. Schmitt-trigger action in the trigger inputs makes the circuit highly tolerant toslower rise and fall times. Inputs include clamp diodes. This enables the use of current limitingresistors to interface inputs to voltages in excess of VCC.
Table 2. Pin descriptionSymbolPinDescription1CEXT, 2CEXT1, 15external capacitor connection (always connected to ground)1REXT/CEXT, 2REXT/CEXT2, 14external capacitor/resistor connection1CD, 2CD3, 13direct reset input (active LOW)1B, 2B4, 12input (LOW to HIGH triggered)1A, 2A5, 11input (HIGH to LOW triggered)1Q, 2Q6, 10output1Q, 2Q7, 9complementary output (active LOW)GND8ground (0 V)VCC16supply voltage
TYPE | DESCRIPTION | Select all |
---|---|---|
Voltage - Supply | 2 V ~ 6 V | |
Current - Output High, Low | 5.2mA, 5.2mA | |
Schmitt Trigger Input | No | |
Independent Circuits | 2 | |
Logic Type | Monostable | |
Product Status | Active | |
Package | Bulk | |
Supplier Device Package | 16-SSOP | |
Series | 74HC | |
Package / Case | 16-SSOP (0.209", 5.30mm Width) | |
Mounting Type | Surface Mount | |
Operating Temperature | -40°C ~ 125°C | |
Propagation Delay | 25 ns |
NXP USA Inc.
NXP Semiconductors, a frontrunner in embedded controllers, offers a wide array of MCUs with Arm-based processors. Their innovation extends to robust Power Management for industry and automotive use. NXP's products globally empower and interconnect, fostering proficiency for individuals, organizations, and the world. Noteworthy is the integration of Freescale Semiconductor into NXP (December 2015).
View All Product from NXP USA Inc.IC MULTIVIBRATOR
IC MULTIVIBRATOR
NOW NEXPERIA 74HCT123DB - MONOST
NOW NEXPERIA 74HCT4538DB MONOSTA
IC MULTIVIBRATOR 22NS 16SSOP
IC MULTIVIBRATOR 77NS 16DIP
IC MULTIVIBRATOR 35NS 16DIP
IC MULTIVIBRATOR 31NS 16SSOP
IC MULTIVIBRATOR 31NS 16DIP
IC MULTIVIBRATOR 22NS 16DIP