GTL2003PW112

GTL2003PW112

Compare
NXP USA Inc.
GTL2003PW112
IC XLATR QUAD BI-DIREC 14-TSSOP
Compare

$0.42

Quantity Available: 3093
SZC Quality Assurance
NXP USA Inc.

NXP USA Inc.

NXP Semiconductors, a frontrunner in embedded controllers, offers a wide array of MCUs with Arm-based processors. Their innovation extends to robust Power Management for industry and automotive use. NXP's products globally empower and interconnect, fostering proficiency for individuals, organizations, and the world. Noteworthy is the integration of Freescale Semiconductor into NXP (December 2015).

View All Product from NXP USA Inc.

GTL2003PW112 2. Features and benefits

 8-bit bidirectional low voltage translator Allows voltage level translation between 0.8 V, 0.9 V, 1.0 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V,3.3 V, and 5 V buses which allows direct interface with GTL, GTL+, LVTTL/TTL and5 V CMOS levels Provides bidirectional voltage translation with no direction pin Low 6.5  ON-state resistance (Ron) between input and output pins (Sn/Dn) Supports hot insertion No power supply required: will not latch up 5 V tolerant inputs Low standby current Flow-through pinout for ease of printed-circuit board trace routing ESD protection exceeds 2000 V HBM per JESD22-A114, and 1000 V CDM perJESD22-C101 Packages offered: TSSOP20, DHVQFN20

GTL2003PW112 1. General description

The Gunning Transceiver Logic - Transceiver Voltage Clamps (GTL-TVC) providehigh-speed voltage translation with low ON-state resistance and minimal propagationdelay. The GTL2003 provides eight NMOS pass transistors (Sn and Dn) with a commongate (GREF) and a reference transistor (SREF and DREF). The device allowsbidirectional voltage translations between 0.8 V and 5.0 V without use of a direction pin.Voltage translation below 0.8 V can be achieved when properly biased. For moreinformation, refer to application note AN11127 (Ref. 1).When the Sn or Dn port is LOW, the clamp is in the ON-state and a low resistanceconnection exists between the Sn and Dn ports. Assuming the higher voltage is on the Dnport, when the Dn port is HIGH, the voltage on the Sn port is limited to the voltage set bythe reference transistor (SREF). When the Sn port is HIGH, the Dn port is pulled to VDD1by the pull-up resistors. This functionality allows a seamless translation between higherand lower voltages selected by the user, without the need for directional control.All transistors have the same electrical characteristics and there is minimal deviation fromone output to another in voltage or propagation delay. This is a benefit over discretetransistor voltage translation solutions, since the fabrication of the transistors issymmetrical. Because all transistors in the device are identical, SREF and DREF can belocated on any of the other eight matched Sn/Dn transistors, allowing for easier boardlayout. The translator's transistors provide excellent ESD protection to lower voltagedevices and at the same time protect less ESD-resistant devices.

GTL2003PW112 3. Applications

GTL2003PW112 6.2 Pin description

Product Attributes

TYPE DESCRIPTION Select all
Channel Type -
Mounting Type -
Translator Type -
Features -
Product Status Active
Operating Temperature -
Package Bulk
Data Rate -
Output Type -
Series *
Output Signal -
Input Signal -
Voltage - VCCB -
Voltage - VCCA -
Channels per Circuit -
Supplier Device Package -
Number of Circuits -
Package / Case -

$0.42

Quantity Available: 3093
SZC Quality Assurance
NXP USA Inc.

NXP USA Inc.

NXP Semiconductors, a frontrunner in embedded controllers, offers a wide array of MCUs with Arm-based processors. Their innovation extends to robust Power Management for industry and automotive use. NXP's products globally empower and interconnect, fostering proficiency for individuals, organizations, and the world. Noteworthy is the integration of Freescale Semiconductor into NXP (December 2015).

View All Product from NXP USA Inc.
45
Serves customers in 45 countries
1000+
Worldwide Manufacturers
$140M
$140M Growth in 5 Years
50.0M+
50M Parts Shipped in 5 Years