NXP USA Inc.
NXP Semiconductors, a frontrunner in embedded controllers, offers a wide array of MCUs with Arm-based processors. Their innovation extends to robust Power Management for industry and automotive use. NXP's products globally empower and interconnect, fostering proficiency for individuals, organizations, and the world. Noteworthy is the integration of Freescale Semiconductor into NXP (December 2015).
View All Product from NXP USA Inc.The following list summarizes the key MPC860 features:
• Embedded single-issue, 32-bit core (implementing the Power Architecture technology) withthirty-two 32-bit general-purpose registers (GPRs)— The core performs branch prediction with conditional prefetch without conditional execution.— 4- or 8-Kbyte data cache and 4- or 16-Kbyte instruction cache (see Table 1)– 16-Kbyte instruction caches are four-way, set-associative with 256 sets; 4-Kbyte instructioncaches are two-way, set-associative with 128 sets.– 8-Kbyte data caches are two-way, set-associative with 256 sets; 4-Kbyte data caches aretwo-way, set-associative with 128 sets.– Cache coherency for both instruction and data caches is maintained on 128-bit (4-word)cache blocks.– Caches are physically addressed, implement a least recently used (LRU) replacementalgorithm, and are lockable on a cache block basis.— MMUs with 32-entry TLB, fully-associative instruction, and data TLBs— MMUs support multiple page sizes of 4-, 16-, and 512-Kbytes, and 8-Mbytes; 16 virtualaddress spaces and 16 protection groups— Advanced on-chip-emulation debug mode32 address lines
• Up to 32-bit data bus (dynamic bus sizing for 8, 16, and 32 bits)
•
• Operates at up to 80 MHz
• Memory controller (eight banks)— Contains complete dynamic RAM (DRAM) controller— Each bank can be a chip select or RAS to support a DRAM bank.— Up to 15 wait states programmable per memory bank— Glueless interface to DRAM, SIMMS, SRAM, EPROM, Flash EPROM, and other memorydevices— DRAM controller programmable to support most size and speed memory interfaces— Four CAS lines, four WE lines, and one OE line— Boot chip-select available at reset (options for 8-, 16-, or 32-bit memory)— Variable block sizes (32 Kbytes to 256 Mbytes)— Selectable write protection— On-chip bus arbitration logic
• General-purpose timers— Four 16-bit timers or two 32-bit timers— Gate mode can enable/disable counting— Interrupt can be masked on reference match and event capture.
TYPE | DESCRIPTION | Select all |
---|---|---|
Number of Cores/Bus Width | 1 Core, 32-Bit | |
Security Features | - | |
Operating Temperature | 0°C ~ 95°C (TA) | |
USB | - | |
SATA | - | |
Ethernet | 10Mbps (4), 10/100Mbps (1) | |
Display & Interface Controllers | - | |
Graphics Acceleration | No | |
RAM Controllers | DRAM | |
Supplier Device Package | 357-PBGA (25x25) | |
Co-Processors/DSP | Communications; CPM | |
Package / Case | 357-BBGA | |
Series | MPC8xx | |
Speed | 80MHz | |
Mounting Type | Surface Mount | |
Package | Tray | |
Product Status | Obsolete | |
Core Processor | MPC8xx | |
Voltage - I/O | 3.3V |
NXP USA Inc.
NXP Semiconductors, a frontrunner in embedded controllers, offers a wide array of MCUs with Arm-based processors. Their innovation extends to robust Power Management for industry and automotive use. NXP's products globally empower and interconnect, fostering proficiency for individuals, organizations, and the world. Noteworthy is the integration of Freescale Semiconductor into NXP (December 2015).
View All Product from NXP USA Inc.IC MPU MPC8XX 80MHZ 357BGA
IC MPU M683XX 33MHZ 144MAPBGA
IC MPU 20MHZ 64QFP
IC MPU M680X0 12MHZ 68PLCC
IC MPU MC68XX 16MHZ 144QFP
IC MPU M683XX 25MHZ 144LQFP
IC MPU MPC8XX 50MHZ 357BGA
IC MPU 25MHZ 357BGA
IC MPU M683XX 25MHZ 144QFP
IC MPU M680X0 25MHZ 128PGA