NXP USA Inc.
NXP Semiconductors, a frontrunner in embedded controllers, offers a wide array of MCUs with Arm-based processors. Their innovation extends to robust Power Management for industry and automotive use. NXP's products globally empower and interconnect, fostering proficiency for individuals, organizations, and the world. Noteworthy is the integration of Freescale Semiconductor into NXP (December 2015).
View All Product from NXP USA Inc. Operating power supply voltage range of 2.3 V to 5.5 V 5 V tolerant I/Os Polarity Inversion register Active LOW interrupt output Low standby current Noise filter on SCL/SDA inputs
The PCA9535 and PCA9535C are 24-pin CMOS devices that provide 16 bits of GeneralPurpose parallel Input/Output (GPIO) expansion for I2C-bus/SMBus applications and wasdeveloped to enhance the NXP Semiconductors family of I2C-bus I/O expanders. Theimprovements include higher drive capability, 5 V I/O tolerance, lower supply current,individual I/O configuration, and smaller packaging. I/O expanders provide a simplesolution when additional I/O is needed for ACPI power switches, sensors, push buttons,LEDs, fans, etc.The PCA9535 and PCA9535C consist of two 8-bit Configuration (Input or Outputselection), Input, Output and Polarity Inversion (active HIGH or active LOW operation)registers. The system master can enable the I/Os as either inputs or outputs by writing tothe I/O configuration bits. The data for each input or output is kept in the correspondingInput or Output register. The polarity of the read register can be inverted with the PolarityInversion register. All registers can be read by the system master. Although pin-to-pin andI2C-bus address compatible with the PCF8575, software changes are required due to theenhancements and are discussed in Application Note AN469.The PCA9535 is identical to the PCA9555 except for the removal of the internal I/Opull-up resistor which greatly reduces power consumption when the I/Os are held LOW.The PCA9535C is identical to the PCA9535 except that all the I/O pins arehigh-impedance open-drain outputs.The PCA9535 and PCA9535C open-drain interrupt output is activated when any inputstate differs from its corresponding Input Port register state and is used to indicate to thesystem master that an input state has changed. The power-on reset sets the registers totheir default values and initializes the device state machine.Three hardware pins (A0, A1, A2) vary the fixed I2C-bus address and allow up to eightdevices to share the same I2C-bus/SMBus. The fixed I2C-bus address of the PCA9535and PCA9535C are the same as the PCA9555 allowing up to eight of these devices in anycombination to share the same I2C-bus/SMBus.
TYPE | DESCRIPTION | Select all |
---|---|---|
Package | Bulk | |
Package / Case | - | |
Product Status | Active | |
Supplier Device Package | - | |
Programmable | Not Verified | |
Type | - | |
Applications | - | |
Series | * | |
Mounting Type | - |
NXP USA Inc.
NXP Semiconductors, a frontrunner in embedded controllers, offers a wide array of MCUs with Arm-based processors. Their innovation extends to robust Power Management for industry and automotive use. NXP's products globally empower and interconnect, fostering proficiency for individuals, organizations, and the world. Noteworthy is the integration of Freescale Semiconductor into NXP (December 2015).
View All Product from NXP USA Inc.IC XPND 400KHZ I2C SMBUS 24TSSOP
IC XPND 400KHZ I2C SMBUS 24TSSOP
IC IOT SECURE ELEMENT 20HX2QFN
IC SECURE AUTHENTICATOR 4WLCSP
NOW WEEN - TYN16X-600CT - SILICO
IC AUTOMATIC DISCHARGE 8SO
NOW WEEN - BTA410X-800BT - 3 QUA
NOW WEEN - BTA316-600D - 3 QUADR
NOW WEEN - BTA216B-600F - 3 QUAD
IC IOT SECURE ELEMENT 20HX2QFN