NXP USA Inc.
NXP Semiconductors, a frontrunner in embedded controllers, offers a wide array of MCUs with Arm-based processors. Their innovation extends to robust Power Management for industry and automotive use. NXP's products globally empower and interconnect, fostering proficiency for individuals, organizations, and the world. Noteworthy is the integration of Freescale Semiconductor into NXP (December 2015).
View All Product from NXP USA Inc.2.1 General features Single full-duplex UART Selectable I2C-bus or SPI interface 1.8 V operation Industrial temperature range: 40 C to +85 C 128 bytes FIFO (transmitter and receiver) Fully compatible with industrial standard 16C450 and equivalent Baud rates up to 5 Mbit/s in 16 clock mode Auto hardware flow control using RTS/CTS Auto software flow control with programmable Xon/Xoff characters Single or double Xon/Xoff characters Automatic RS-485 support (automatic slave address detection) RS-485 driver direction control via RTS signal RS-485 driver direction control inversion Built-in IrDA encoder and decoder interface Supports IrDA SIR with speeds up to 115.2 kbit/s Software reset Transmitter and receiver can be enabled/disabled independent of each other
The SC16IS850L is a slave I2C-bus/SPI interface to a single-channel high performanceUART. It offers data rates up to 5 Mbit/s and guarantees low operating and sleepingcurrent. The device comes in very small HVQFN24 and TSSOP24 packages, whichmakes it ideally suitable for handheld, battery operated applications. It also enablesseamless protocol conversion from I2C-bus or SPI to and RS-232/RS-485 and are fullybidirectional.The SC16IS850L supports SPI clock speeds up to 12 Mbit/s, and it supports IrDA SIR upto 115.2 kbit/s. Its internal register set is backward-compatible with the widely used andwidely popular 16C850. This allows the software to be easily written or ported fromanother platform.The SC16IS850L also provides additional advanced features such as auto hardware andsoftware flow control, automatic RS-485 support, and software reset. This allows thesoftware to reset the UART at any moment, independent of the hardware reset signal.
400 kbit/s maximum speed Compliant with I2C-bus Fast-mode (Fm) speed Slave mode only
Factory automation and process control Portable and battery operated devices Cellular data devices
TYPE | DESCRIPTION | Select all |
---|---|---|
With Auto Flow Control | Yes | |
Voltage - Supply | 1.65V ~ 1.95V | |
Data Rate (Max) | 5Mbps | |
Protocol | RS232, RS485 | |
FIFO's | 128 Byte | |
Supplier Device Package | 24-TSSOP | |
Number of Channels | 1, UART | |
Features | - | |
Package / Case | 24-TSSOP (0.173", 4.40mm Width) | |
Product Status | Obsolete | |
Mounting Type | Surface Mount | |
Package | Tape & Reel (TR) | |
With Modem Control | - | |
Series | - | |
With False Start Bit Detection | Yes | |
With IrDA Encoder/Decoder | Yes |
NXP USA Inc.
NXP Semiconductors, a frontrunner in embedded controllers, offers a wide array of MCUs with Arm-based processors. Their innovation extends to robust Power Management for industry and automotive use. NXP's products globally empower and interconnect, fostering proficiency for individuals, organizations, and the world. Noteworthy is the integration of Freescale Semiconductor into NXP (December 2015).
View All Product from NXP USA Inc.IC UART SGL I2C BUS SPI 16TSSOP
IC UART DUAL W/FIFO 48-LQFP
IC UART QUAD W/FIFO 64-LQFP
IC UART DUAL W/FIFO 48-LQFP
IC UART SINGLE W/FIFO 32-HVQFN
SERIAL I/O CONTROLLER, 2 CHANNEL
UART IC 2, DUART CHANNEL 32 BYTE
UART INTERFACE IC 2CH. UART 32B
UART INTERFACE IC 16CB 2.5V-5V 4
UART IC 4, QUART CHANNEL 16 BYTE