NXP USA Inc.
NXP Semiconductors, a frontrunner in embedded controllers, offers a wide array of MCUs with Arm-based processors. Their innovation extends to robust Power Management for industry and automotive use. NXP's products globally empower and interconnect, fostering proficiency for individuals, organizations, and the world. Noteworthy is the integration of Freescale Semiconductor into NXP (December 2015).
View All Product from NXP USA Inc.
• Digital IF demodulation for all analog TV standards worldwide (M/N, B/G/H, D/K, I,L and L-accent standard)
• Multistandard true synchronous demodulation with active carrier regeneration
• Alignment-free
• 16 MHz typical reference frequency input (from low IF tuner) or operating as crystaloscillator
• Internal PLL synthesizer which allows the use of a low-cost crystal (typically 16 MHz)
• Especially suited for the NXP Silicon Tuner TDA1827x
• No SAW filter needed
• Low application effort and external component count in combination with theTDA1827x
• Simple upgrade of TDA8295 possible
• 12-bit low power IF ADC on chip running with 54 MHz or 27 MHz
• Two 10-bit DACs on chip for CVBS and SSIF or audio
• Easy programming for I2C-bus
• High flexibility due to various I2C-bus programming registers
• I2C-bus interface and I2C-bus feed-through for tuner programming
• Four I2C-bus addresses selectable via two external pins
The TDA8296 is an alignment-free digital multistandard vision and sound low IF signalPLL demodulator for positive and negative video modulation including AM and FM monosound processing. It can be used in all countries worldwide for M/N, B/G/H, I, D/K,L and L-accent standard. CVBS and SSIF/mono audio are provided via two DACs. FMradio preprocessing is included for simple interfacing with demodulator/stereo decoderbackends.The IC is especially suited for the application with the NXP Silicon Tuner TDA1827x.All the processing is done in the digital domain.The chip has an ‘easy programming’ mode to make the I2C-bus protocol very simple. Inprinciple, only one bit sets the proper standard with recommended content. However, ifthis is not suitable, free programming is always possible.Note: Register 06h has to be reprogrammed to new value C4h (see Section 9.2 andSection 9.3.1).
• TV applications
• Recording
• PC TV applications
TYPE | DESCRIPTION | Select all |
---|---|---|
LO Frequency | - | |
Package | Tray | |
Package / Case | 40-VFQFN Exposed Pad | |
Series | - | |
Mounting Type | Surface Mount | |
Voltage - Supply | 1.1V ~ 3.6V | |
Current - Supply | 65 mA | |
Noise Figure | - | |
Gain | - | |
P1dB | - | |
RF Frequency | - | |
Function | Demodulator | |
Product Status | Obsolete | |
Supplier Device Package | 40-HVQFN (6x6) |
NXP USA Inc.
NXP Semiconductors, a frontrunner in embedded controllers, offers a wide array of MCUs with Arm-based processors. Their innovation extends to robust Power Management for industry and automotive use. NXP's products globally empower and interconnect, fostering proficiency for individuals, organizations, and the world. Noteworthy is the integration of Freescale Semiconductor into NXP (December 2015).
View All Product from NXP USA Inc.RF DEMODULATOR IC 40HVQFN
RF DEMODULATOR IC 48QFN
RF DEMODULATOR IC 68QFN
RF DEMODULATOR IC 48QFN
DIODE ZENER 20V 0.5W 5% UNIDIR
DIODE ZENER 9.1V 0.25W 5% UNIDIR
DIODE ZENER 4.7V 500MW DO35
DIODE ZENER 20V 300MW SOT23-3
RF POWER N-CHANNEL, MOSFET
RF POWER N-CHANNEL, MOSFET