DS2108S/TR

DS2108S/TR

Compare
DS2108S/TR
DIFFERENTIAL SCSI TERMINATOR
Compare

$7.06

Quantity Available: 12750
SZC Quality Assurance
Analog Devices Inc./Maxim Integrated

Analog Devices Inc./Maxim Integrated

Maxim Integrated has amalgamated with Analog Devices, imparting an augmented repertoire of superlative mixed-signal and power governance innovations, fostering clientele triumph across diverse sectors. This amalgamation begets a spectrum of resolutions for surmounting the utmost intricate quandaries, spanning from direct current to the expanse of 100 gigahertz, encompassing miniscule nanowatt realms to robust kilowatt domains, spanning the sensor continuum to the ethereal expanse of cloud. Delve deeper into Analog Devices' enriched assemblage on their product dossier.

View All Product from Analog Devices Inc./Maxim Integrated

DS2108S/TR FEATURES


• Fully compliant with SCSI, SCSI-2 and SCSI-3 standards
• Conforms to EIA RS-485 standard
• Provides differential termination for 9 pairs ofsignal lines
• Operates with SCSI signal voltages of -7 to+12 Volts
• Laser-trimmed 330 and 150-ohm terminationresistors have ±5% tolerance over fulltemperature range
• Switchable power-down mode
• Low power down capacitance of 6 pF
• 24-pin plastic SOIC (DS2108S)

DS2108S/TR DESCRIPTION

The DS2108 SCSI Terminator has been specifically designed for High Voltage Differential (HVD) SCSIsystems requiring switchable termination. The DS2108 integrates eighteen 330-ohm and nine 150-ohmprecise switched termination resistors into a monolithic IC. The surface mount SOIC package saves boardspace over conventional resistor SIPs. The termination resistors can be isolated from the SCSI bus undersoftware or hardware control. While in the powered down mode, the DS2108 isolates the nine terminatorblocks from the bus while adding only 6 pF capacitance to each signal line of the SCSI bus.

DS2108S/TR PIN DESCRIPTION Table 1

PIN1, 112, 3, 4, 5, 6,7, 8, 9, 101213, 2314, 15, 16,17, 18, 19,20, 21, 2224SYMBOL DESCRIPTIONTPWRTermination Power. Should be connected to the SCSI TERMPWR line.Bypass with a 2.2 µF cap in parallel with a 0.1 µF cap as shown in Figure2.R1N…R9N Signal Termination Negative. Connect to –SIGNAL of SCSI bus.NCGNDR1P…R9PNo Connect. Do not connect any signal to this pin.Ground. Signal ground; 0.0V.Signal Termination Positive. Connect to +SIGNAL of SCSI bus.PDPower Down. When tied low, the DS2108 enters a power-down mode.Contains an internal 50K pull-up. Strap low to deactivate the DS2108,leave open circuited to activate the DS2108.3 of 5

Product Attributes

TYPE DESCRIPTION Select all
Package Bulk
Series -
Supplier Device Package 24-SOIC
Package / Case 24-SOIC (0.295", 7.50mm Width)
Mounting Type Surface Mount
Operating Temperature 0°C ~ 70°C
Voltage - Supply 4V ~ 5.25V
Number of Terminations 9
Type SCSI
Product Status Active

$7.06

Quantity Available: 12750
SZC Quality Assurance
Analog Devices Inc./Maxim Integrated

Analog Devices Inc./Maxim Integrated

Maxim Integrated has amalgamated with Analog Devices, imparting an augmented repertoire of superlative mixed-signal and power governance innovations, fostering clientele triumph across diverse sectors. This amalgamation begets a spectrum of resolutions for surmounting the utmost intricate quandaries, spanning from direct current to the expanse of 100 gigahertz, encompassing miniscule nanowatt realms to robust kilowatt domains, spanning the sensor continuum to the ethereal expanse of cloud. Delve deeper into Analog Devices' enriched assemblage on their product dossier.

View All Product from Analog Devices Inc./Maxim Integrated
45
Serves customers in 45 countries
1000+
Worldwide Manufacturers
$140M
$140M Growth in 5 Years
50.0M+
50M Parts Shipped in 5 Years