What is the Surface Mount ?

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

What is the Operating Temperature ?

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

What is the Packaging ?

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

What is the Part Status ?

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

What is the Terminal Form ?

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

What is the Terminal Pitch ?

The center distance from one pole to the next.

What is the Max Supply Voltage ?

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

What is the Min Supply Voltage ?

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

What is the Nominal Supply Current ?

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

What is the Quiescent Current ?

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

What is the Synchronous Rectifier ?

Synchronous rectification is a technique for improving the efficiency of rectification by replacing diodes with actively controlled switches, usually power MOSFETs or power bipolar junction transistors (BJT).

What is the RoHS Status ?

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

XC3130-PC68CPH

Name: XC3130-PC68CPH
Brand: AMD
Price: 6.90 USD
Availability: InStock
Rating: 5 (15 reviews)

Compare

Manufacturer AMD

Product Number XC3130-PC68CPH

Description XC3130 - XC3000 SERIES FIELD PRO

Datasheet XC3130-PC68CPH Datasheet(pdf)

Delivery

Payment

Compare

$6.90

Price update：a months ago

Available in stock： 2897

Serves customers in 45 countries

1000+

Worldwide Manufacturers

$140M

$140M Growth in 5 Years

50.0M+

50M Parts Shipped in 5 Years

AMD

AMD stands as a preeminent purveyor of All Programmable Field-Programmable Gate Arrays (FPGAs), System-on-Chips (SoCs), Multiprocessor SoCs (MPSoCs), and Three-Dimensional Integrated Circuits (3D ICs). Notably, AMD confers singular prowess in facilitating software-defined and hardware-optimized applications, thus propelling progress across domains like Cloud Computing, 5G Wireless, Embedded Vision, and Industrial Internet of Things (IoT).

View All Product from AMD

Popular Products

Product Details

Shipping

Package

Quality Guarantee

The CMOS XC3000 Class of Logic Cell Array (LCA) families provide a group of high-performance, high-density, digital integrated circuits. Their regular, extendable, flexible, user-programmable array architecture is com· posed of a configuration program store plus three types of configurable elements: a perimeter of 1/0 Blocks (lOBs), a core array of Configurable Logic Bocks (CLBs) and re· sources for interconnection. The general structure of an LCA device is shown in Figure 1 on the next page. The XACT development system provides schematic capture and auto place-and-route for design entry. Logic and timing simulation, and in-circuit emulation are available as design verification alternatives. The design editor is used for interactive design optimization, and to compile the data pattern that represents the configuration program.

The LCA user logic functions and interconnections are determined by the configuration program data stored in internal static memory cells. The program can be loaded in any of several modes to accommodate various system requirements. The program data resides externally in an EEPROM, EPROM or ROM on the application circuit board, or on a floppy disk or hard disk. On-chip initialization logic provides for optional automatic loading of program data at power-up. The companion XC17XX Serial Configuration PROMs provide a very simple serial config· uration program storage in a one-lime programmable package.

Feature

• Ideal for a wide range of custom VLSI design tasks - Replaces TTL, MSI, and other PLD logic - Integrates complete sub-systems into a single package - Avoids the NRE, time delay, and risk of conventional masked gate arrays • High-performance CMOS static memory technology - Guaranteed toggle rates of 70 to 325 MHz, logic delays from 9 to 2.2 ns - System clock speeds over 80 MHz - Low quiescent and active power consumption • Flexible FPGA architecture - Compatible arrays ranging from 1,000 to 7,500 gate complexity - Extensive register, combinatorial, and 1/0 capabilities - High fan-out signal distribution, low-skew clock nets - Internal 3-state bus capabilities - TTL or CMOS input thresholds - On-chip crystal oscillator amplifier • Unlimited reprogrammability - Easy design iteration - In-system logic changes • Extensive Packaging Options - Over 20 different packages - Plastic and ceramic surface-mount and pin-grid· array packages - Thin and Very Thin Quad Flat Pack (TQFP and VQFP) options • Ready for volume production - Standard, off-the-shelf product availability - 100% factory pre-tested devices

- Excellent reliability record

• Complete XACT Development System - Schematic capture, automatic place and route - Logic and timing simulation - Interactive design editor for design optimization - Timing calculator - Interfaces to popular design environments like Viewlogic, Cadence, Mentor Graphics, and others

Shipping Cost

1. Shipping starts at $40, but prices may vary for certain countries like South Africa, Brazil, India, Pakistan, Israel, etc.
2. The basic freight for packages ≤0.5kg or equivalent volume is influenced by the time zone and country.

Shipping Method

1. Our products are currently shipped using DHL, SF, and UPS. For low quantities, FedEx is the chosen carrier.

Delivery Time

1. Once shipped, the estimated delivery time is contingent on the selected shipping method.

Step 1

Prepare product

Step 2

Vacuum packaging

Step 3

Anti-static bag

Step 4

Individual package

Step 5

Packaging box

Step 6

Barcode shipping label

SZC's logistic and inventory management programs bring you unmatched success.

Our strategic hubs located in Futian, Longgang, Nanshan offer a variety of customized programs designed for specific customers' needs.

We also have long-standing relationships with major logistics carriers and provide flexible solutions to meet your individual requirements.

1. Every electronic component you purchase from us comes with a 365-Day Warranty. We stand behind the quality of our products.

2. Should you receive any item that isn't in perfect condition, we are committed to arranging a refund or replacement responsibly. Please note that items must be in their original condition for these options to be available.