STPM066S-V0Y

STPM066S-V0Y

Compare
STPM066S-V0Y
Linear IC's
No Datasheet
Compare

$2.34

Price update:a months ago
Available in stock: 5606
45
Serves customers in 45 countries
1000+
Worldwide Manufacturers
$140M
$140M Growth in 5 Years
50.0M+
50M Parts Shipped in 5 Years
STMicroelectronics

STMicroelectronics

STMicroelectronics is a leading global semiconductor company known for pioneering cutting-edge solutions across microelectronics. With unmatched silicon expertise, potent manufacturing, rich IP, and strategic alliances, it's at the forefront of SoC technology, guiding convergence trends.

View All Product from STMicroelectronics

The STPM01 is designed for effective measurement of active, reactive and apparent energy in a power line system using Rogowski coil, current transformer and shunt sensors. This device can be implemented as a single chip monophase energy meter or as a peripheral measurement in a microcontroller based monophase or 3-phase energy meter. The STPM01 consists, essentially, of two parts: the analog part and the digital part. The former, is composed by preamplifier and 1storder Δ ∑ A/D converter blocks, band gap voltage reference, low drop voltage regulator, the latter, is composed by system control, oscillator, hard wired DSP and SPI interface. There is also an OTP block, which is controlled through the SPI by means of a dedicated command set. The configured bits are used for testing, configuration and calibration purpose. From a pair of Δ ∑ output signals coming from analog section, a DSP unit computes the amount of consummated active, reactive and apparent energy, RMS and instantaneous values of voltage and current. The results of computation are available as pulse frequency and states on the digital outputs of the device or as data bits in a data stream, which can be read from the device by means of SPI interface. This system bus interface is used also during production testing of the device and/or for temporary or permanent programming of bits of internal OTP. In the STPM01 an output signal with pulse frequency proportional to energy is generated, this signal is used in the calibration phase of the energy meter application allowing a very easy approach. When the device is fully configured and calibrated, a dedicated bit of OTP block can be written permanently in order to prevent accidental entering into some test mode or changing any configuration bit.

Feature

  • Active, reactive, apparent energies and RMS values
  • Ripple free active energy pulsed output
  • Live and neutral monitoring for tamper detection
  • Easy and fast digital calibration in only one point over the whole current range
  • OTP for calibration and configuration
  • Integrated linear VREGs for digital and analog supply
  • Selectable RC or crystal oscillator
  • Support 50 ÷ 60 Hz – IEC62052-11, IEC62053-2x specification
  • Less than 0.1 % error
  • Precision voltage reference: 1.23 V and 30 ppm/°C max

Product Attributes

TYPE DESCRIPTION Select all
Product Status Active
Applications Automotive
Current - Supply 40mA
Voltage - Supply 4V ~ 32V
Operating Temperature -40°C ~ 150°C (TJ)
Mounting Type Surface Mount
Package / Case 48-TFQFN Exposed Pad
Supplier Device Package 48-VFQFPN (7x7)
Series Automotive, AEC-Q100
Package Bulk

Blog

$2.34

Price update:a months ago
Available in stock: 5606
STMicroelectronics

STMicroelectronics

STMicroelectronics is a leading global semiconductor company known for pioneering cutting-edge solutions across microelectronics. With unmatched silicon expertise, potent manufacturing, rich IP, and strategic alliances, it's at the forefront of SoC technology, guiding convergence trends.

View All Product from STMicroelectronics

Blog