AD9361BBCZ

AD9361BBCZ

Compare
AD9361BBCZ
IC RF TXRX CELLULAR 144LFBGA
Compare

$59.47

Price update:a months ago
Available in stock: 3000
45
Serves customers in 45 countries
1000+
Worldwide Manufacturers
$140M
$140M Growth in 5 Years
50.0M+
50M Parts Shipped in 5 Years
Analog Devices Inc.

Analog Devices Inc.

Analog Devices (NASDAQ: ADI) leads in crafting high-performance analog, mixed-signal, and digital signal processing integrated circuits. For decades, they've tackled signal processing challenges across global electronics. With over 100,000 clients, their products convert real-world phenomena into electrical signals. Merged with Maxim Integrated, they offer top-tier mixed-signal and power management technologies, solving complex problems from DC to 100 GHz and sensor to cloud.

View All Product from Analog Devices Inc.
AD9361BBCZ actual photo Pinout

FEATURES

RF 2 × 2 transceiver with integrated 12-bit DACs and ADCs  

Band: 70 MHz to 6.0 GHz

Supports TDD and FDD operation

Tunable channel bandwidth: <200 kHz to 56 MHz

Dual receivers: 6 differential or 12 single-ended inputs

Superior receiver sensitivity with a noise figure of 2 dB at  800 MHz local oscillator (LO) 

RX gain control Real-time monitor and control signals for manual gain Independent automatic gain control 

Dual transmitters: 4 differential outputs

Highly linear broadband transmitter TX EVM: ≤−40 dB TX noise: ≤−157 dBm/Hz noise floor TX monitor: ≥66 dB dynamic range with 1 dB accuracy

Integrated fractional-N synthesizers 2.4 Hz maximum LO step size

Multichip synchronization

CMOS/LVDS digital interface

APPLICATIONS

Point to point communication systems

Femtocell/picocell/microcell base stations

General-purpose radio systems

GENERAL DESCRIPTION

The AD9361BBCZ is a high performance, highly integrated radio frequency (RF) Agile Transceiver™ designed for use in 3G and 4G base station applications. Its programmability and wideband capability make it ideal for a broad range of transceiver applications. The device combines a RF front end with a flexible mixed-signal baseband section and integrated frequency synthesizers, simplifying design-in by providing a configurable digital interface to a processor. The AD9361BBCZ operates in the 70 MHz to 6.0 GHz range, covering most licensed and unlicensed bands. Channel bandwidths from less than 200 kHz to 56 MHz are supported.

The two independent direct conversion receivers have state-of-theart noise figure and linearity. Each receive (RX) subsystem includes independent automatic gain control (AGC), dc offset correction, quadrature correction, and digital filtering, thereby eliminating the need for these functions in the digital baseband. The AD9361 also has flexible manual gain modes that can be externally controlled. Two high dynamic range ADCs per channel digitize the received I and Q signals and pass them through configurable decimation filters and 128-tap finite impulse response (FIR) filters to produce a 12-bit output signal at the appropriate sample rate.

The transmitters use a direct conversion architecture that achieves high modulation accuracy with ultralow noise. This transmitter design produces a best in class TX EVM of <−40 dB, allowing significant system margin for the external PA selection.

The on-board transmit (TX) power monitor can be used as a power detector, enabling highly accurate TX power measurements. The fully integrated phase-locked loops (PLLs) provide low power fractional-N frequency synthesis for all receive and transmit channels. Channel isolation, demanded by frequency division duplex (FDD) systems, is integrated into the design. All VCO and loop filter components are integrated

The core of the AD9361BBCZ can be powered directly from a 1.3 V regulator. The IC is controlled via a standard 4-wire serial port and four real-time I/O control pins. Comprehensive power-down modes are included to minimize power consumption during normal use. The AD9361BBCZ is packaged in a 10 mm × 10 mm, 144-ball chip scale package ball grid array (CSP_BGA). 

Feature

  • High performance
  • Superior receiver sensitivity with a noise figure <2.5dB
  • RX gain control
  • Real-time monitor and control signals for manual gain
  • Independent automatic gain control

Applications

Communications & Networking

Product Attributes

TYPE DESCRIPTION Select all
Current - Transmitting 240mA ~ 820mA
Current - Receiving 175mA ~ 445mA
Operating Temperature -40°C ~ 85°C
Protocol LTE
RF Family/Standard Cellular
Type TxRx Only
Programmable Not Verified
Product Status Active
Package Tray
Voltage - Supply 1.3V
Serial Interfaces SPI
Power - Output 8dBm
Supplier Device Package 144-CSPBGA (10x10)
Package / Case 144-LFBGA, CSPBGA
Frequency 70MHz ~ 6GHz
Mounting Type Surface Mount

Blog

$59.47

Price update:a months ago
Available in stock: 3000
Analog Devices Inc.

Analog Devices Inc.

Analog Devices (NASDAQ: ADI) leads in crafting high-performance analog, mixed-signal, and digital signal processing integrated circuits. For decades, they've tackled signal processing challenges across global electronics. With over 100,000 clients, their products convert real-world phenomena into electrical signals. Merged with Maxim Integrated, they offer top-tier mixed-signal and power management technologies, solving complex problems from DC to 100 GHz and sensor to cloud.

View All Product from Analog Devices Inc.

Blog