ADXL372BCCZ-RL7

ADXL372BCCZ-RL7

Compare
ADXL372BCCZ-RL7
ACCELEROMETER 200G SPI 16LGA
Compare

$11.71

Price update:a months ago
Available in stock: 3000
45
Serves customers in 45 countries
1000+
Worldwide Manufacturers
$140M
$140M Growth in 5 Years
50.0M+
50M Parts Shipped in 5 Years
Analog Devices Inc.

Analog Devices Inc.

Analog Devices (NASDAQ: ADI) leads in crafting high-performance analog, mixed-signal, and digital signal processing integrated circuits. For decades, they've tackled signal processing challenges across global electronics. With over 100,000 clients, their products convert real-world phenomena into electrical signals. Merged with Maxim Integrated, they offer top-tier mixed-signal and power management technologies, solving complex problems from DC to 100 GHz and sensor to cloud.

View All Product from Analog Devices Inc.
ADXL372BCCZ-RL7 actual photo Pinout

The ADXL372BCCZ-RL7 is an ultralow power, 3-axis, ±200 g MEMS accelerometer that consumes 22 μA at a 3200 Hz output data rate (ODR). The ADXL372BCCZ-RL7 does not power cycle its front end to achieve its low power operation and therefore does not run the risk of aliasing the output of the sensor.

In addition to its ultralow power consumption, the ADXL372BCCZ-RL7 has many features to enable impact detection while providing system level power reduction. The device includes a deep multimode output first in, first out (FIFO), several activity detection modes, and a method for capturing only the peak acceleration of over threshold events.

Two additional lower power modes with interrupt driven, wake-up features are available for monitoring motion during periods of inactivity. In wake-up mode, acceleration data can be averaged to obtain a low enough output noise to trigger on low g thresholds. In instant on mode, the ADXL372BCCZ-RL7 consumes 1.4 μA while continuously monitoring the environment for impacts. When an impact event that exceeds the internally set threshold is detected, the device switches to normal operating mode fast enough to record the event.

High g applications tend to experience acceleration content over a wide range of frequencies. The ADXL372BCCZ-RL7 includes a 4-pole low-pass antialiasing filter to attenuate out of band signals that are common in high g applications. The ADXL372BCCZ-RL7 also incorporates a high-pass filter to eliminate initial and slow changing errors, such as ambient temperature drift.

The ADXL372BCCZ-RL7 provides 12-bit output data at 100 mg/LSB scale factor. The user can access configuration and data registers via the serial peripheral interface (SPI) or limited I2C protocol. The ADXL372BCCZ-RL7 operates over a wide supply voltage range and is available in a 3 mm × 3.25 mm × 1.06 mm package.

Multifunction pin names may be referenced by their relevant function only.

Feature

  • ±200g measurement range
  • 200 Hz to 3200 Hz user-selectable bandwidth with 4-pole anti-aliasing filter
  • Selectable over-sampling ratio 
  • Adjustable high-pass filter 
  • Ultralow power
    • Power can be derived from a coin cell battery
    • 22 µA @ 3200 Hz ODR, 2.5 V supply
    • Low power, wake-up mode for low g activity detection
    • 1.4 μA instant on mode with adjustable threshold
    • <0.1 μA standby mode
  • Built-in features for system-level power savings
    • Autonomous interrupt processing without processor intervention
    • Deep embedded FIFO to minimize host processor load
  • Ultralow power event monitoring detects impacts and wakes up fast enough to capture the transient events
  • Ability to capture and store peak acceleration values of events 
  • Adjustable, low g threshold activity/inactivity detection
  • Wide supply range: 1.6 V to 3.5 V 
  • Acceleration sample synchronization via external trigger
  • SPI digital interface and limited 12C interface format support 
  • 12-bit output at 100 mg/LSB scale factor
  • Wide temperature range: −40°C to 105°C
  • Small, thin, 3 mm × 3.25 mm × 1.06 mm package

Applications

  • Impact and shock detection
  • Asset health assessment
  • Portable Internet of Things (IoT) edge nodes
  • Concussion and head trauma detection

Product Attributes

TYPE DESCRIPTION Select all
Bandwidth 3.2kHz
Sensitivity (LSB/g) 10
Acceleration Range ±200g
Axis X, Y, Z
Supplier Device Package 16-LGA (3x3.25)
Type Digital
Package / Case 16-TFLGA
Mounting Type Surface Mount
Product Status Active
Package Tape & Reel (TR)
Operating Temperature -40°C ~ 105°C
Features Adjustable Bandwidth
Voltage - Supply 1.6V ~ 3.5V
Output Type SPI

Blog

$11.71

Price update:a months ago
Available in stock: 3000
Analog Devices Inc.

Analog Devices Inc.

Analog Devices (NASDAQ: ADI) leads in crafting high-performance analog, mixed-signal, and digital signal processing integrated circuits. For decades, they've tackled signal processing challenges across global electronics. With over 100,000 clients, their products convert real-world phenomena into electrical signals. Merged with Maxim Integrated, they offer top-tier mixed-signal and power management technologies, solving complex problems from DC to 100 GHz and sensor to cloud.

View All Product from Analog Devices Inc.

Blog