HCPL-6431

HCPL-6431

Compare
Broadcom Limited
HCPL-6431
OPTOISO 1.5KV PUSH PULL 20LCCC
Compare

$89.57

Price update:a months ago
Available in stock: 80
45
Serves customers in 45 countries
1000+
Worldwide Manufacturers
$140M
$140M Growth in 5 Years
50.0M+
50M Parts Shipped in 5 Years
Broadcom Limited

Broadcom Limited

Broadcom stands as a multifaceted worldwide pioneer in semiconductors, forged over five decades of ingenuity, cooperation, and engineering eminence. Its broad-ranging collection of products caters to diverse applications in four pivotal end sectors: wired infrastructure, wireless communications, enterprise storage, and industrial realms. Our products find purpose across domains such as data center networks, residential interconnectivity, telecommunications gear, and renewable energy systems, spanning data servers, automation, and displays.

View All Product from Broadcom Limited
HCPL-6431 Products

The HCPL-6431 is a high reliability Class H two channel hermetically sealed optocoupler in a 20 pad Leadless Ceramic Chip Carrier. Solder dipped pads is available and the solder contains lead.

The product is capable of operation and storage over the full military temperature range and may also be purchased as either commercial grade, with full MIL-PRF-38534 Class Level K testing, or from the DLAStandard Microcircuit Drawing 5962-89571. The HCPL-6431 is manufactured and tested on a MIL-PRF-38534 certified line and is included in the DLAQualified Manufacturers List QML-38534 for Hybrid Microcircuits.

Each channel contains an AlGaAs light emitting diode which is optically coupled to an integrated high gain photon detector. This combination results in very high data rate capability. The detector has a threshold with hysteresis which typically provide 0.25 mA of differential mode noise immunity and minimizes the potential for output signal chatter. The detector in the single channel units has a three state output stage which eliminates the need for a pull-up resistor and allows for direct drive of a data bus.

All units are compatible with TTL, STTL, LSTTL, and HCMOS logic families. The 35 ns pulse width distortion specification guarantees a 10 MBd signaling rate at 125 degrees C with 35% pulse width distortion.

Package styles for this die set in one or two channels are 8-Pin DIP through hole and 20 pad leadless ceramic chip carrier. Most devices may be purchased with a variety of lead forms and plating options. See the datasheet for details.

Because the same electrical die (emitters and detectors) are used for each channel of each device listed in the datasheet, absolute maximum ratings, recommended operating conditions, electrical specifications, and performance characteristics shown in the datasheet figures are virtually identical for all parts. Occasional exceptions exist due to package variations and limitations and are as noted. Additionally, the same package assembly processes and materials are used in all devices. These similarities give justification for the use of data obtained from one part to represent other parts performance for reliability and certain limited radiation test results.

Feature

  • High Reliability, Two Channel, 20 Pad LCCC
  • Performance Guaranteed from -55 degCto 125 degC
  • MIL-PRF-38534 Class H, QML-38534
  • Dual Marked with Device Part Number and DLAStandard Microcircuit Drawing
  • High Radiation Immunity
  • Reliability Data
  • MIL-PRF-38534 Class K Available
  • Three Hermetically Sealed Package Configurations
  • One and Two Channel Devices (different package)
  • High Speed: 40 M bit/s
  • Active (Totem Pole) Outputs
  • CMR: 500 V/µs Guaranteed
  • 1500 Vdc Withstand Test Voltage
  • Three Stage Output Available
  • Compatible with TTL, STTL,LSTTL, and HCMOS Logic Families

Applications

  • Military and Aerospace
  • High Reliability Systems
  • Transportation, Medical, and Life Critical Systems
  • Isolation of High Speed Logic Systems
  • Switching Power Supplies
  • Isolated Bus Driver (Networking Applications)
  • Ground Loop Elimination
  • Computer-Peripheral Interfaces
  • Pulse Transformer Replacement
  • High Speed Disk Drive I/O
  • Digital Isolation for A/D, D/A Conversion
  • Harsh Industrial Environments

Product Attributes

TYPE DESCRIPTION Select all
Package Bulk
Product Status Active
Number of Channels 2
Inputs - Side 1/Side 2 2/0
Voltage - Isolation 1500VDC
Common Mode Transient Immunity (Min) 500V/µs
Input Type DC
Output Type Push-Pull, Totem Pole
Current - Output / Channel 25 mA
Data Rate 40Mbps
Propagation Delay tpLH / tpHL (Max) 60ns, 60ns
Rise / Fall Time (Typ) 15ns, 10ns
Voltage - Forward (Vf) (Typ) 1.35V
Current - DC Forward (If) (Max) 10mA
Voltage - Supply 4.75V ~ 5.25V
Operating Temperature -55°C ~ 125°C
Mounting Type Surface Mount
Package / Case 20-CLCC
Supplier Device Package 20-LCCC (8.89x8.89)

Blog

$89.57

Price update:a months ago
Available in stock: 80
Broadcom Limited

Broadcom Limited

Broadcom stands as a multifaceted worldwide pioneer in semiconductors, forged over five decades of ingenuity, cooperation, and engineering eminence. Its broad-ranging collection of products caters to diverse applications in four pivotal end sectors: wired infrastructure, wireless communications, enterprise storage, and industrial realms. Our products find purpose across domains such as data center networks, residential interconnectivity, telecommunications gear, and renewable energy systems, spanning data servers, automation, and displays.

View All Product from Broadcom Limited

Blog