NXP USA Inc.
NXP Semiconductors, a frontrunner in embedded controllers, offers a wide array of MCUs with Arm-based processors. Their innovation extends to robust Power Management for industry and automotive use. NXP's products globally empower and interconnect, fostering proficiency for individuals, organizations, and the world. Noteworthy is the integration of Freescale Semiconductor into NXP (December 2015).
View All Product from NXP USA Inc.The MK60DN device of Kinetis K60-100 MHz IEEE 1588Ethernet MCUs are built on the Arm Cortex-M4 core and feature advanced analog integration and serial communication.Available down to a 5 mm x 5 mm wafer-level chip-scale package (WLCSP), these devices maximize board space and enhance performance with minimum-length interconnections, allowing the miniaturization of existing applications.This family shares the comprehensive enablement and scalability of the Kinetis portfolio.
10 low-power modes with power and clock gating for optimal peripheral activity and recovery times. Stop currents down to 2 µA, andrun currents of <350 µA/MHz, with 4 µs wake-up from Stop mode
Full memory and analog operation down to 1.71 volts for extended battery life
Low-leakage wake-up unit with up to eight internal modules and 16 pins as wake-up sources in low-leakage stop (LLS)/very low-leakage stop (VLLS) modes
Low-power timer for continuous system operation in reduced power state
Flash, SRAM and FlexMemory
256 KB - 512 KB flash. Fast access, high reliability with four-level security protection
64 KB-128 KB of SRAM
FlexMemory: 32 bytes-4KB of user-segmentable byte write/erase EEPROM for data tables/system data. EEPROM with over 10M cycles and flash with 70 µsec write time (brownouts without data loss/corruption). No user or system intervention to complete programming and erase functions and full operation down to 1.71 volts. In addition, up to 256 KB can be used for extra program code, data or EEPROM backup
Mixed-Signal Capability
Two high-speed 16-bit analog-to-digital-converter (ADC) with configurable resolution. Single or differential output mode operation for improved noise rejection. 863 ns conversion time achievable with programmable delay block triggering
Up two 12-bit digital-to-analog-converter (DAC) for analog waveform generation for audio applications
Three high-speed comparators providing fast and accurate motor over-current protection by driving PWMs to a safe state
Analog voltage reference provides an accurate reference to analog blocks, ADC and DAC, and replaces external voltage references to reduce system cost
Performance
Cortex-M4 core with DSP, 100MHz clock, single-cycle MAC, and single instruction multiple data (SIMD) extensions
16-channel DMA for peripheral and memory servicing with reduced CPU loading and faster system throughput
Crossbar switch enables concurrent multi-master bus accesses, increasing bus bandwidth
Independent flash banks allow concurrent code execution and firmware updating with no performance degradation or complex coding routines
Timing and Control
Up to three FlexTimers with a total of 12 channels. Hardware dead-time insertion and quadrature decoding for motor control
Four-channel 32-bit periodic interrupt timer provides a time base for RTOS task scheduler or trigger source for ADC conversion and programmable delay block
Human-Machine Interface
Hardware touch-sensing interface with up to 16 inputs. Operates in all low power modes (minimum current adder when enabled). Hardware implementation avoids software polling method. High sensitivity level allows the use of overlay surfaces up to 5 mm thick
Connectivity and Communications
IEEE 1588 Ethernet MAC with hardware time stamping provides precision clock synchronization for real-time industrial control
USB 2.0 On-The-Go (full speed). Device charge detect optimizes charging current/time for portable USB devices enabling longer battery life. Low-voltage regulator supplies up to 120 mA off-chip at 3.3 volts to power external components from 5 volts input
Up to five UARTs with IrDA support including one UART with ISO7816 smart card support. Variety of data size, format and transmission/reception settings supported by multiple industrial communication protocols
Inter-IC Sound (I2S) serial interface for audio system interfacing
Two CAN modules for industrial network bridging
Three DSPI and two I2C
Reliability, Safety and Security
Hardware Encryption coprocessor for secure data transfer and storage. Faster than software implementations and with minimal CPU loading. Supports a wide variety of algorithms - DES, 3DES, AES, MD5, SHA-1, SHA-256
Memory protection unit provides memory protection for all masters on the crossbar switch, increasing software reliability
Cyclic redundancy check engine validates memory contents and communication data, increasing system reliability
Independent-clocked COP guards against clock skew or code runaway for fail-safe applications such as the IEC 60730 safety standard for household appliances
External watchdog monitor drives output pin to safe state external components if watchdog event occurs
This product is included in NXP®.s product longevity program, with assured supply for a minimum of 10 years after launch
External Peripheral Support
FlexBus external bus interface provides interface options to memories and peripherals such as graphics displays. Supports up to 6 chip selects and 2GB addressable space
Secure digital host controller supports SD, SDIO, MMC or CE-ATA cards for in-application software upgrades, media files or adding Wi-Fi support
TYPE | DESCRIPTION | Select all |
---|---|---|
Voltage - Supply (Vcc/Vdd) | 1.71V ~ 3.6V | |
Core Processor | ARM® Cortex®-M4 | |
Data Converters | A/D 42x16b; D/A 2x12b | |
Core Size | 32-Bit Single-Core | |
Oscillator Type | Internal | |
Speed | 100MHz | |
Operating Temperature | -40°C ~ 105°C (TA) | |
Connectivity | CANbus, EBI/EMI, Ethernet, I²C, IrDA, SD, SPI, UART/USART, USB, USB OTG | |
Mounting Type | Surface Mount | |
Peripherals | DMA, I²S, LVD, POR, PWM, WDT | |
Package / Case | 144-LBGA | |
Number of I/O | 100 | |
Supplier Device Package | 144-MAPBGA (13x13) | |
Program Memory Size | 256KB (256K x 8) | |
Program Memory Type | FLASH | |
EEPROM Size | 4K x 8 | |
RAM Size | 64K x 8 | |
Programmable | Not Verified | |
Series | Kinetis K60 | |
Package | Tray | |
Product Status | Active |
NXP USA Inc.
NXP Semiconductors, a frontrunner in embedded controllers, offers a wide array of MCUs with Arm-based processors. Their innovation extends to robust Power Management for industry and automotive use. NXP's products globally empower and interconnect, fostering proficiency for individuals, organizations, and the world. Noteworthy is the integration of Freescale Semiconductor into NXP (December 2015).
View All Product from NXP USA Inc.IC MCU 32B 256KB FLASH 144MAPBGA
MICROCONTROLLER, 8 BIT, HC08/S08
IC MCU 8BIT 8KB FLASH 32LQFP
IC MCU 8BIT 32KB FLASH 64LQFP
IC MCU 8BIT 16KB FLASH 44QFP
IC MCU 32BIT 96KB FLASH 64QFP
IC MCU 32BIT 128KB FLASH 64QFN
8-BIT, FLASH, 8MHZ PQFP32
MICROCONTROLLER, 16 BIT, HCS12 C
IC MCU 8BIT 8KB OTP 44QFP