LMH6642QMF/NOPB

LMH6642QMF/NOPB

Compare
LMH6642QMF/NOPB
IC OPAMP VFB 1 CIRCUIT SOT23-5
Compare

$1.21

Price update:a months ago
Available in stock: 4928
45
Serves customers in 45 countries
1000+
Worldwide Manufacturers
$140M
$140M Growth in 5 Years
50.0M+
50M Parts Shipped in 5 Years
Texas Instruments

Texas Instruments

Texas Instruments Incorporated (TI) is a global semiconductor powerhouse, crafts advanced analog ICs and embedded processors. Fueled by top-tier minds, TI's innovations drive tech's future, impacting 100,000+ clients.

View All Product from Texas Instruments
LMH6642QMF/NOPB Products

The LMH664X family true single supply voltage feedback amplifiers offer high speed (130 MHz), low distortion (?62 dBc), and exceptionally high output current (approximately 75 mA) at low cost and with reduced power consumption when compared against existing devices with similar performance.

Input common mode voltage range extends to 0.5 V below V? and 1 V from V+. Output voltage range extends to within 40mV of either supply rail, allowing wide dynamic range especially desirable in low voltage applications. The output stage is capable of approximately 75 mA in order to drive heavy loads. Fast output Slew Rate (130 V/μs) ensures large peak-to-peak output swings can be maintained even at higher speeds, resulting in exceptional full power bandwidth of 40 MHz with a 3-V supply. These characteristics, along with low cost, are ideal features for a multitude of industrial and commercial applications.

Careful attention has been paid to ensure device stability under all operating voltages and modes. The result is a very well behaved frequency response characteristic (0.1dB gain flatness up the 12MHz under 150Ω load and AV = +2) with minimal peaking (typically 2dB maximum) for any gain setting and under both heavy and light loads. This along with fast settling time (68ns) and low distortion allows the device to operate well in ADC buffer, and high frequency filter applications as well as other applications.

This device family offers professional quality video performance with low DG (0.01%) and DP (0.01°) characteristics. Differential Gain and Differential Phase characteristics are also well maintained under heavy loads (150?) and throughout the output voltage range. The LMH664X family is offered in single (LMH6642) and dual (LMH6643).

Feature

  • (VS = ±5 V, TA = 25°C, RL = 2 k?, AV = +1. Typical Values Unless Unless Specified).
  • ?3dB BW (AV = +1) 130 MHz
  • Supply Voltage Range 2.7 V to 10 V
  • Slew Rate, (AV = ?1) 130V/μs1
  • Supply Current (no load) 2.7 mA/amp
  • Output Short Circuit Current +115 mA/?145 mA
  • Linear Output Current ±75mA
  • Input Common Mode Voltage 0.5V Beyond V?, 1V from V+
  • Output Voltage Swing 40mV from Rails
  • Input Voltage Noise (100kHz) 17nV/√Hz
  • THD (5MHz, RL = 2 k?, VO = 2VPP, AV= +2) ?62 dBc
  • Settling Time 68ns
  • Fully Characterized for 3 V, 5 V, and ±5 V
  • Overdrive Recovery 100ns
  • Output Short Circuit Protected2
  • No Output Phase Reversal with CMVR Exceeded
  • LMH6643QMM and LMH6642QMF are AEC-Q100 Grade 3 Qualified and are Manufactured on an Automotive Grade Flow
Description

The LMH664X family true single supply voltage feedback amplifiers offer high speed (130 MHz), low distortion (?62 dBc), and exceptionally high output current (approximately 75 mA) at low cost and with reduced power consumption when compared against existing devices with similar performance.

Input common mode voltage range extends to 0.5 V below V? and 1 V from V+. Output voltage range extends to within 40mV of either supply rail, allowing wide dynamic range especially desirable in low voltage applications. The output stage is capable of approximately 75 mA in order to drive heavy loads. Fast output Slew Rate (130 V/μs) ensures large peak-to-peak output swings can be maintained even at higher speeds, resulting in exceptional full power bandwidth of 40 MHz with a 3-V supply. These characteristics, along with low cost, are ideal features for a multitude of industrial and commercial applications.

Careful attention has been paid to ensure device stability under all operating voltages and modes. The result is a very well behaved frequency response characteristic (0.1dB gain flatness up the 12MHz under 150Ω load and AV = +2) with minimal peaking (typically 2dB maximum) for any gain setting and under both heavy and light loads. This along with fast settling time (68ns) and low distortion allows the device to operate well in ADC buffer, and high frequency filter applications as well as other applications.

This device family offers professional quality video performance with low DG (0.01%) and DP (0.01°) characteristics. Differential Gain and Differential Phase characteristics are also well maintained under heavy loads (150?) and throughout the output voltage range. The LMH664X family is offered in single (LMH6642) and dual (LMH6643).

Product Attributes

TYPE DESCRIPTION Select all
-3db Bandwidth 130 MHz
Supplier Device Package SOT-23-5
Output Type Rail-to-Rail
Mounting Type Surface Mount
Number of Circuits 1
Operating Temperature -40°C ~ 85°C
Amplifier Type Voltage Feedback
Voltage - Supply Span (Max) 10 V
Product Status Active
Voltage - Supply Span (Min) 2.7 V
Package Tape & Reel (TR)
Current - Output / Channel 75 mA
Current - Supply 2.7mA
Voltage - Input Offset 1 mV
Current - Input Bias 1.6 µA
Slew Rate 135V/µs
Package / Case SC-74A, SOT-753

Blog

$1.21

Price update:a months ago
Available in stock: 4928
Texas Instruments

Texas Instruments

Texas Instruments Incorporated (TI) is a global semiconductor powerhouse, crafts advanced analog ICs and embedded processors. Fueled by top-tier minds, TI's innovations drive tech's future, impacting 100,000+ clients.

View All Product from Texas Instruments

Blog